|
|
Home
Products
Store
Forum
Warehouse
Contact Us
|
|
|
|
Author
|
Topic: Smart Three way crossover
|
|
Oscar Neundorfer
Master Film Handler
Posts: 275
From: Senoia, GA
Registered: May 2000
|
posted 11-01-2002 06:54 AM
Do not worry. In BYPASS mode, the MF and HF outputs are high pass filtered with a passive RC filter to prevent driver damage. The LF output is allowed to run full range.The BYPASS mode is there for emergencies only in the event the crossover fails. The sound balance between the lf, mf, and hf will most likely not be correct, BUT there will be still be sound and you can probably go on with the show. You may want to test this sometime when you are not running shows just to see what the sound is like in BYPASS. Do NOT expect it to be as good as normal mode because it will not be nearly as good. Remember this BYPASS mode is for emergencies only. I hope this information clears this up for you. ------------------ Oscar Neundorfer Chief Engineer SMART Devices, Inc. oscar@smartdev.com
| IP: Logged
|
|
|
|
All times are Central (GMT -6:00)
|
|
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2
The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion
and agrees to release the authors from any and all liability.
|
|
|
|