![Film-Tech Cinema Systems](http://www.film-tech.com/images/masthead.jpg) |
|
Home
Products
Store
Forum
Warehouse
Contact Us
|
|
Author
|
Topic: Question: Dimensions for scope plate
|
|
John Pytlak
Film God
![](http://www.film-tech.com/ubbmembers/331cap.gif)
Posts: 9987
From: Rochester, NY 14650-1922
Registered: Jan 2000
|
posted 11-05-2002 10:28 AM
Standard SMPTE 195 specifies the projectable image area for all the commonly used 35mm print formats.For "scope", the projectable area is 0.825 x 0.690 inches. When filing an aperture, the image area is evaluated using the SMPTE 35-PA (RP40) projector alignment film. here SMPTE Standards here SMPTE Test Materials here Evans Criswell's Website here THX Guidelines here Caring About Composition ------------------ John P. Pytlak, Senior Technical Specialist Worldwide Technical Services, Entertainment Imaging Research Labs, Building 69, Room 7525A Rochester, New York, 14650-1922 USA Tel: +1 585 477 5325 Cell: +1 585 781 4036 Fax: +1 585 722 7243 e-mail: john.pytlak@kodak.com Web site: here
| IP: Logged
|
|
|
|
All times are Central (GMT -6:00)
|
|
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2
The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion
and agrees to release the authors from any and all liability.
|
|
|
|