my profile | my password | search | faq & rules | forum home

» Film-Tech Forum ARCHIVE   » Operations   » Film Handlers' Forum   » Christie Focus Problem

Author Topic: Christie Focus Problem Robert E. Allen Phenomenal Film Handler Posts: 1078 From: Checotah, Oklahoma Registered: Jul 2002 posted 05-02-2007 02:54 AM                     We have 15 Christie machines at our house and prior to coming here I'd run just about everything made EXCEPT Christie. I can't say I'm at all thrilled to get my hands on them. One of them has a focus drift problem in the flat mode. I mean it is constant requiring the operator to return to that machine every couple of minutes to correct the focus. I can stand there and watch it drift. I checked to see that the lens is tight in its mount and attempted to move it by hand but it's solid. So we moved the print to another maching and hung a "No Flat Prints" sign on the machine. There is no problem with scope prints on that machine. Any advise? (I thought about putting the machine in the dumpster but realized I couldn't cover the cost on my salary.)  |  IP: Logged Brad Miller Administrator Posts: 17775 From: Plano, TX (36.2 miles NW of Rockwall) Registered: May 99 posted 05-02-2007 03:10 AM                     Robert, the flat lens is probably not screwed tightly into its barrel. Remember even though the barrel of the lens is mounted tightly into the turret doesn't mean the actual lens element isn't working it's way loose with the vibration of the projector.  |  IP: Logged Monte L Fullmer Film God Posts: 8367 From: Nampa, Idaho, USA Registered: Nov 2004 posted 05-02-2007 03:23 AM                     ...we run into that problem when the booth operators holler at my due to focus issues in SCOPE ... sure enough, the backup element lens barrel has came unscewed out of the mains barrel about half way.. Having manual turrets, they grab the rear of the scope lens and use it as a handle to swing the turret around..and not knowing that they are unscrewing the element barrel at the same time. I remember a cinema that had the same flat focus issue with a PRO-35 'boat anchor' - horrible flat focus, til I found the element barrel was halfway unscrewed from the mains barrel and actually tipping upward when incerted into the lens holder.. -Monte  |  IP: Logged Alex Grueneberg Expert Film Handler Posts: 125 From: Chicago, IL Registered: Aug 2004 posted 05-02-2007 04:35 AM                        Can loose glass elements in the flat lens cause drift at all? We've been having a similar issue.  |  IP: Logged Louis Bornwasser Film God Posts: 4441 From: prospect ky usa Registered: Mar 2005 posted 05-02-2007 04:44 AM                        Easy way to prove it. Swap FLAT lens with another house; does it stay or go? Louis  |  IP: Logged Mark Gulbrandsen Resident Trollmaster Posts: 16657 From: Music City Registered: Jun 99 posted 05-02-2007 08:03 AM                     quote: Robert E. Allen We have 15 Christie machines at our house WOW! One in each room... bedrooms, bathrooms and even in the kitchen . If you stop and analyze the Christie and begin to understand it you will actually discover that its a dam good machine(assuming you don't have an older model with the shutter gearbox). Mark  |  IP: Logged Ken Lackner Phenomenal Film Handler Posts: 1907 From: Atlanta, GA, USA Registered: Sep 2001 posted 05-02-2007 11:01 AM                     quote: Alex Grueneberg Can loose glass elements in the flat lens cause drift at all? We've been having a similar issue. Absolutely. To determine if this is the case, remove the lens, hold it up to your ear, and give it a gentle shake. Hear anything? If so, then one (or more) of the glass elements is loose and the lens will need to be sent in for repair.  |  IP: Logged Mark Gulbrandsen Resident Trollmaster Posts: 16657 From: Music City Registered: Jun 99 posted 05-02-2007 01:30 PM                     Actually even a local camera repair shop can tighten up the element lock rings with an appropriate lens spanner. Then apply a small dot of black paint to aid in locking that ring in place or it may loosen up on you again. Easy repair! Mark  |  IP: Logged Robert E. Allen Phenomenal Film Handler Posts: 1078 From: Checotah, Oklahoma Registered: Jul 2002 posted 05-03-2007 01:45 AM                     Thanks Brad et al. I'll check that out.  |  IP: Logged

All times are Central (GMT -6:00)

Printer-friendly view of this topic

Hop To: Select a Forum: Category: Operations -------------------- Digital Cinema Forum Film Handlers' Forum Large Format Forum Ground Level Feature Info, Trailer Attachments & REAL Credit Offsets Category: Community -------------------- Film-Yak Film Handlers' Movie Reviews The Afterlife Bob Maar's Joke-A-Thon Category: Classified -------------------- Equipment and Supplies Wanted/For Sale Help Wanted/Seeking Employment Category: System -------------------- Software Beta Testing Forum

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.