![Film-Tech Cinema Systems](http://www.film-tech.com/images/masthead.jpg) |
|
Home
Products
Store
Forum
Warehouse
Contact Us
|
|
Author
|
Topic: sdds automation
|
|
Marin Zorica
Jedi Master Film Handler
![](/ubbmembers/1716a.jpg)
Posts: 671
From: Biograd na Moru, Croatia
Registered: May 2003
|
posted 03-18-2010 01:21 PM
Don't know does dolby or sony made and boards for this, even is not matter.
First, use D2000 AFTER CP65 and you won't need any automation, since if SDDS drops out, it will switch bypass of all inputs directly to outputs.
On other hand if you like to install CP65 as master, than you need to trigger aux input, and back SR when sdds drops out....than, if not you first need to modify D2000 unit as follows, then on DB37 connector PIN32 you have 5V or so when SDDS plays, and 0V when not plays, you could use simple 4N35 optocupler to match this to CP65 logic input.
This is mod you need to made, in case you're unit don't have it-
| IP: Logged
|
|
|
|
All times are Central (GMT -6:00)
|
|
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2
The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion
and agrees to release the authors from any and all liability.
|
|
|
|