Film-Tech Forum ARCHIVE: NEC NC900 tamper fail error code 177

my profile | my password | search | faq & rules | forum home

»	Film-Tech Forum ARCHIVE » Operations » Digital Cinema Forum » NEC NC900 tamper fail error code 177

Author

Topic: NEC NC900 tamper fail error code 177

Tom Wienholt
Master Film Handler

Posts: 371
From: Towson, MD, USA
Registered: Dec 2002

posted 07-11-2014 12:03 AM

All of the panels are in place. Not sure why I am getting this error. Closed the service door with dcc software but this error persists. Content plays back fine. What could be causing this?

| IP: Logged

Mark Gulbrandsen
Resident Trollmaster

Posts: 16657
From: Music City
Registered: Jun 99

posted 07-11-2014 01:07 PM

Just look it up on the error code list and see what it is. If you don't have that list call Strong and ask for it. Also, check to be sure the dinky likely microswitches are not broken.

| IP: Logged

Mark Gulbrandsen
Resident Trollmaster

Posts: 16657
From: Music City
Registered: Jun 99

posted 07-11-2014 04:30 PM

I looked on the error list and a 177 is a door tamper... So for sure check the micro switches.

| IP: Logged

All times are Central (GMT -6:00)

Printer-friendly view of this topic

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.