 |
|
 Home
Products
Store
Forum
Warehouse
Contact Us
|
|
|
|
 
|
|
Author
|
Topic: New DP-70 Parts Now Available
|
Mark Gulbrandsen
Resident Trollmaster
Posts: 16657
From: Music City
Registered: Jun 99
|
posted 07-08-2004 11:43 PM
We have put several hard to get, sought after, DP-70/AA-2 parts back in production plus added some upgrades/updates to extend the life span of these fantastic projectors till the end of film.
These now include:
SHORT XENON LAMPHOUSE TABLE AND SLIDE
Fully adjustable slide, finsihed in the original color.
995.00 ea
LENS BUSHING:
One piece 35/70 ecentric bushing directly takes 70.6mm diameter lenses.
360.00 ea
24 TOOTH VKF SPROCKETS: (available soon)
To replace the expensive combo alumnium sprocket.
95.00 ea.
BACP RSTR2000KA-2 RED LED READER:
RSTR 2000 installed on rebuilt and refinished soundhead. These also now have a "split" lateral guide roller for no film weave. All wiring terminates to a male 9 pin D connector on the rear of the sound head which allows for easy removal and maintainance.
Note: Original soundheads are stripped, machined for the kit, clean up grind on the sound drum O.D., casting is powdercoated, new bearings with proper pre-load spring, lateral guide is split and now spring loaded for no weave, wiring is to 9 pin D connector on rear of sound head which conforms to Dolby cell pinout.
1295.00 with exchange soundhead.
(Inquire about oughtright sound reproducer purchase if needed.)
VARIABLE FREQUENCY MOTOR DRIVE KIT:
Gets rid of the existing motor, mount, and V belt. Smoother operation and smoother startups/rundowns, adjustable overcurrent protection can save gear train in event of film wrap on sprocket or seize up, Auto-Jog feature stops projector in threading position, easy interface to automation.
1295.00 ea.
Complete conversion includes: Controler, motor, motor mount, coupling, instructions.
CLACO Equipment And Service
1212 South State St.
Salt Lake City, UT 84111
801-355-1250 Phone
801-355-1259 Fax
e-mail vince@clacoequipment.com
posted by
Mark @ CLACO
| IP: Logged
|
|
|
|
All times are Central (GMT -6:00)
|
|
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2
The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion
and agrees to release the authors from any and all liability.
|
|
|
|
Printer-friendly view of this topic