Film-Tech Cinema Systems
Film-Tech Forum ARCHIVE


  
my profile | my password | search | faq & rules | forum home
  next oldest topic   next newest topic
» Film-Tech Forum ARCHIVE   » Community   » Film-Yak   » Brenkert Projector Demo

   
Author Topic: Brenkert Projector Demo
Steve Matz
Jedi Master Film Handler

Posts: 672
From: Billings, Montana, USA
Registered: Sep 2003


 - posted 09-17-2014 09:45 PM      Profile for Steve Matz   Email Steve Matz   Send New Private Message       Edit/Delete Post 
Obviously this is a BX100 BRENKERT(RCA)

Look at the Oil Spray Lubrication when he pans around
to the Left. Isn't this exactly like an XL's system. BRENKERT
used this system on their new BX80 Model introduced in 1939.
XL's weren't made until 1948...

There is no Copying other people's engineering features
in the Industry [Roll Eyes] [puke]

https://www.youtube.com/watch?v=8fXoVJecDV8&noredirect=1

 |  IP: Logged

Monte L Fullmer
Film God

Posts: 8367
From: Nampa, Idaho, USA
Registered: Nov 2004


 - posted 09-17-2014 10:53 PM      Profile for Monte L Fullmer   Email Monte L Fullmer   Send New Private Message       Edit/Delete Post 
Wasn't 100's a double shutter unit? Looks good though. thx

 |  IP: Logged

Joe Redifer
You need a beating today

Posts: 12859
From: Denver, Colorado
Registered: May 99


 - posted 09-17-2014 11:34 PM      Profile for Joe Redifer   Author's Homepage   Email Joe Redifer   Send New Private Message       Edit/Delete Post 
I don't know who copied who but I'll tell you that the Brenkerts I used at the Telluride Film Festival were far and away the most awful projectors I ever had the displeasure of using. Simplexes may not be the best but they were way more enjoyable to use and work on than the Brenkerts.

 |  IP: Logged

Steve Matz
Jedi Master Film Handler

Posts: 672
From: Billings, Montana, USA
Registered: Sep 2003


 - posted 09-17-2014 11:39 PM      Profile for Steve Matz   Email Steve Matz   Send New Private Message       Edit/Delete Post 
Actually Run # 2 is a better Video and Shows More [beer]

https://www.youtube.com/watch?v=0MpdgMo27VE

You must have run into a couple Beater Brenkerts Joe; still probably one of the most used Brands in vintage Drive-in history!

 |  IP: Logged

Gordon McLeod
Film God

Posts: 9532
From: Toronto Ontario Canada
Registered: Jun 99


 - posted 09-18-2014 10:08 AM      Profile for Gordon McLeod   Email Gordon McLeod   Send New Private Message       Edit/Delete Post 
I have never liked Brenkerts especially with very short focus xenon systems they always had a tad of travel ghost
When i took over engineering for this company my first task was retireing all the brenkerts replacing them with simplesx ballantyne and cinemecanica

 |  IP: Logged

Buck Wilson
Jedi Master Film Handler

Posts: 894
From: St. Joseph MO, USA
Registered: Sep 2010


 - posted 09-18-2014 01:25 PM      Profile for Buck Wilson   Email Buck Wilson   Send New Private Message       Edit/Delete Post 
Cool videos!

What a neat setup. I had not seen the etched glass Peerless lamphouse topper before, that is beyond classy.

Is that a xenon conversion kit or some homebrew of some fashion?

Lighted gearbox, too? Nice!!!!

 |  IP: Logged

Gary Wachter
Film Handler

Posts: 21
From: Coppell, TX, USA
Registered: Jul 2010


 - posted 09-19-2014 02:59 PM      Profile for Gary Wachter   Email Gary Wachter   Send New Private Message       Edit/Delete Post 
I recognized that, it is my guest bedroom (with no space for guests)!

That Brenkert clip was recorded right after a complete restoration a few years ago. This BX-100 has a single shutter. I have another one with a double shutter to rebuild at a later date.

The Magnarc lamp house was also completely stripped down and redone with a wrinkle powder coat. Even though all the parts were available to run carbon arc, the finish was way too nice to burn up. In its place there is a xenon reflector/lamp assembly from a GE Taleria TV projector re-fitted with a 750 watt lamp from a Navitar slide projector.

The Peerless glass nameplate originally light up from a slit on the bottom from by way of the arc light. Now there is a strip of RGB LEDs underneath it to make it any color.

Thanks for the comments!

 |  IP: Logged

Steve Matz
Jedi Master Film Handler

Posts: 672
From: Billings, Montana, USA
Registered: Sep 2003


 - posted 09-19-2014 08:11 PM      Profile for Steve Matz   Email Steve Matz   Send New Private Message       Edit/Delete Post 
Very Nice Restoration Gary, A BRENKERT PROJECTOR(BX40)was my 2nd 35MM that I ever saw(after an E7)when I was 6 years old. It was in the 1ST Drive-in built in MT; built back in 1948(only 2 in the state then) In fact all the Drive-in's here used BRENKERT's until they closed in the late 70's. One exception,Our Motor-Vu DI after building this humongous Scope Screen around 54 went to Motio AAA's... [beer]

 |  IP: Logged

Frank Angel
Film God

Posts: 5305
From: Brooklyn NY USA
Registered: Dec 1999


 - posted 09-21-2014 02:17 PM      Profile for Frank Angel   Author's Homepage   Email Frank Angel   Send New Private Message       Edit/Delete Post 
Gary, great restoration. Thanks for posting. One question, what are the green and red indicators on the back of the Magarc access door, below the ammeter? The plate between them looks original, although I can't make out the text besides "When Lit" I have never seen this on any Peerless lamphouse.

We still use two of them (unconverted).

 |  IP: Logged

Rick Raskin
Phenomenal Film Handler

Posts: 1100
From: Manassas Virginia
Registered: Jan 2003


 - posted 09-21-2014 03:35 PM      Profile for Rick Raskin   Email Rick Raskin   Send New Private Message       Edit/Delete Post 
I recall seeing them on lamps at the old Jefferson Theater in Falls Church, VA. IIRC they indicated whether or not the trim was aligned. Both lamps would not have been lit at the same time.

 |  IP: Logged

Mark Gulbrandsen
Resident Trollmaster

Posts: 16657
From: Music City
Registered: Jun 99


 - posted 09-21-2014 07:21 PM      Profile for Mark Gulbrandsen   Email Mark Gulbrandsen   Send New Private Message       Edit/Delete Post 
Brenkert was the first with central oil lubrication i the USA. A lot of European projectors had it since the beginning of film.

The down side abut BX-80/100 is that unless you have an original factory fiber cone shutter drive gear then the projector is gonna have a very short life span. The gears Wolk made were cut from fiber material that was way too coarse and the gears literally fall apart in the oil. The double shutters also tend to creep on their hubs.

The BX-60 is really the one to restore and keep because it uses an entirely different gearing system that is not only more efficient but rarely if ever breaks down.

There were Brenkerts all over Chicago and the Suburbs and I never had issues with using short focus xenons. Most had Super Lum-Ex's or Super 80's on them.

Mark

 |  IP: Logged

Steve Matz
Jedi Master Film Handler

Posts: 672
From: Billings, Montana, USA
Registered: Sep 2003


 - posted 09-21-2014 10:13 PM      Profile for Steve Matz   Email Steve Matz   Send New Private Message       Edit/Delete Post 
Mark; The BX-60 uses the same Internal gear drive system as the BX-80&40.In fact they all use the same Parts internally except for the updated Oil Pump used later on. The only parts differences are the Shutter pieces used between the single shutter BX-60 and the Double Shutter BX-62.All the Brenkert P.N.s are the same on all the Models and all of them also use the same Intermittent assembly clear up through the BX-100 model.RCA in the 50's converted all the old P.Ns to their System and have no resemblance at all to the old Brenkert P.N.s [Confused]

 |  IP: Logged

Frank Angel
Film God

Posts: 5305
From: Brooklyn NY USA
Registered: Dec 1999


 - posted 09-22-2014 09:22 AM      Profile for Frank Angel   Author's Homepage   Email Frank Angel   Send New Private Message       Edit/Delete Post 
quote: Rick Raskin
I recall seeing them on lamps at the old Jefferson Theater in Falls Church, VA. IIRC they indicated whether or not the trim was aligned. Both lamps would not have been lit at the same time.
Cool. If anyone has the circuit diagram for how that's wired, it might be worth looking into (we still use two of these configured to burn 80amps). I'd be interested in seeing how these worked. I wonder if they'd be any more accurate than the arc viewer projected on the indicator card; that's very accurate, simple and actually quite elegant.

 |  IP: Logged



All times are Central (GMT -6:00)  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:



Powered by Infopop Corporation
UBB.classicTM 6.3.1.2

The Film-Tech Forums are designed for various members related to the cinema industry to express their opinions, viewpoints and testimonials on various products, services and events based upon speculation, personal knowledge and factual information through use, therefore all views represented here allow no liability upon the publishers of this web site and the owners of said views assume no liability for any ill will resulting from these postings. The posts made here are for educational as well as entertainment purposes and as such anyone viewing this portion of the website must accept these views as statements of the author of that opinion and agrees to release the authors from any and all liability.

© 1999-2020 Film-Tech Cinema Systems, LLC. All rights reserved.