Tweet
The issue: I have a three lens turret and a three hole aperture plate. I use the 1:66 plate hole for screening 3D. The problem is when I select the 1:66 position the auto aperture motor doesn't pull the plate far enough (toward the non-operator side) to clear the vertical bar between 1:66 and 1:85 holes.
Is there an easy way to adjust the distance that the aperture will travel to put he 1:66 hole in the correct position? I've got the Kinoton book but it's explanation is over my head!!
Is there an easy way to adjust the distance that the aperture will travel to put he 1:66 hole in the correct position? I've got the Kinoton book but it's explanation is over my head!!