Kinoton FP20 chain drive sprocket alignment

[Jonathan Wood]

Hi ,
Ive been rebuilding a kinoton fp20 and everything has gone well until I came to re attaching the upper and lower chain drives to the sprocket wheels. Does anyone have sight of the inside of a machine so they could tell me which chains go around which sprocket drive wheels? In my pic the upper wheel has been removed . Thanks

[Jonathan Wood]

Problem solved guys , I was being stupid !

[Steve Guttag]

Yeah...the upper one is always the same...it just forms an oval. The lower one can get adventurous, based on what else is going on, how they want to tension it, what sort of take up you have...etc. But, normally, there is just one way that will work and make sense.

[Jonathan Wood]

Thanks Steve