Tweet
That pricey sensor from Eastern Instruments (a "velocity averaging" one) is pretty cool (pardon the pun). You can spec that for the install when you get around to the big booth renovations project, and then, when they start complaining about how expensive it all is, you'll make 'em a bit happier by down-specing to one of the $27 ones. (It might be $28 by the time you get to that point?) Still, selecting that one now gives you an easy compromise point to save costs without actually compromising the necessary service parameters & requirements for what such a device has to do for you in there.
- Welcome to the new Film-Tech Forums! The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate. To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above. Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here. Once the registration has been approved, you will be able to login via the link in the upper right corner of this page. Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face. Thank you!
Comment