friends. I have always had a problem with my CP-500. I have never managed to get the digital sound and automatic analogue (reverse scan) working I have the DSTR20 digital reader, and the analog head of the Christie 35mm, both connected to the processor with their respective cables. and the configuration of the CP500 is the one seen in the attached photo. I studied the user manual and I definitely can't get it to work, the reverse scan automatically. Please help.
Announcement
Collapse
No announcement yet.
Reverse scan problem cp500
Collapse
X
-
Reverse scan problem cp500
friends. I have always had a problem with my CP-500. I have never managed to get the digital sound and automatic analogue (reverse scan) working I have the DSTR20 digital reader, and the analog head of the Christie 35mm, both connected to the processor with their respective cables. and the configuration of the CP500 is the one seen in the attached photo. I studied the user manual and I definitely can't get it to work, the reverse scan automatically. Please help.You do not have permission to view this gallery.
This gallery has 3 photos.Tags: None
-
It looks like you might have the dual analog/digital reader in your projector head but I can't quite tell for sure.
Then you have the BACP digital penthouse reader on top of the projector.
Is your CP500 configured to read digital from the penthouse or from the projector?
If you are trying to get data from one but the CP500 thinks it should be coming from the other, that might be the source of the problem.
Also, in the projector, which part of the sound reader are you using for analog?
One lens/LED combination is for reading analog and the other lens/LED combination is for digital.
You can not mix them up. Each works only for its intended use.
Comment
Comment