Welcome to the new Film-Tech Forums!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
next revision will have "CineScrews", non-replaceable. The server can be fitted only once. The screws are single use, once the board is removed, you need a new one.
This nonsense (which does not apply to servers only of course) has to stop.
Not all SR-1000 have the 2 TB cinecache. It's an option. Ours does not have it. We have the portable storage which has 4 drive bays and ours was populated with 3X1TB drives. The portable storage device is a separate unit that connects via esata and has its own power supply.
We were told to avoid the cinecache version because if it fails and we're out of warranty, we need a whole new server instead of just a replacement storage device.
Why would you let the server warranty expire? The warranty also covers the media block and that is the most expensive part of any server, they usually cost around 4k. Am very familiar with the PSD 3000 drive box as all the 50 or so SX-3000's I installed have them.. That's the only part of the SX-3000 I have had consistent problems with over the years. Also, if you update the server then you can only update the RAID by breaking the raid itself and creating a new one. Many other technicians skip doing that because A. They don't want to lose all the content, and B, they don't even know it has to be done. If you don't update the RAID then you will eventually have skipping problems, although many think is a bad drive and it's not. Of course you could FTP the content to a NAS, or another server in the booth. and then move it back to where it came when the RAID is good again. I personally would not want a server that uses standard hard drives in this day and age. SSD might be ok, but even those wear out from excessive write cycles. And it seems that none of the server manufacturers except USL ever advocated using them...
As far as I know, I can't purchase extended warranty for 10 years of service life? We don't want a new server every 5 years so I'm trying to purchase what will be most reliable. A portable storage device is cheaper to replace or the drives inside it than a whole new sr-1000 unit. We don't have anything separate like a server and separate media block.
​​​​​​I can ask GDC if the cinecache can be replaced if it fails.
next revision will have "CineScrews", non-replaceable. The server can be fitted only once. The screws are single use, once the board is removed, you need a new one.
Do you mean the faceplate screws? If so, you won't be able to move the server to another projector, or even pull it to clean the contacts during maintenance, replace the cert battery, etc. etc. That's insane!
Do you mean the faceplate screws? If so, you won't be able to move the server to another projector, or even pull it to clean the contacts during maintenance, replace the cert battery, etc. etc. That's insane!
I'm fairly sure he was being sarcastic. At least I hope so lol.
So comparing specs between the 3 servers, some offer 4k with higher fps like 60 or 120. Is that something we should factor into our decision? Are there any high frame rate films today or expected in the future?
Mark, the IMS series 2000 and 3000 have had 2TB SSDs as well as the Barco ICMP (X) though the 1TB spinning rust drives have been reliable. I don't know where you get your information but SSDs have been in cinemas for years and most of our new systems are using them. Again, on the SR-1000...we've used the Enterprise storage with 2TB drives (4TB total storage) and have had zero issues. Only the PSD sites have had storage issues. Even in these times, HDD/SDD are relatively cheap, user changeable and reliable. We do have a couple of sites that have the IMS3000's NAS storage for about 10.5TB total (shows play off the NAS). Those sites tend to have festivals or a large quantity of 1-off shows (screening rooms), however. Our most popular configuration remains the 4TB of total storage via 3 x 2TB drives.
I have not had issues with Dolby's tech support (or Barco/Cineonic or GDC).
Note, on the GDC SR-1000...you can get up to 10-years of warranty (3 with the server 7-years extended) if you want to protect your purchase out that long. It won't cover the consumables (drives) but it should cover most everything else. Barco ties their server warranty to the projector it is in so, in effect, you could warrant your ICMP out to 10-years too. Dolby tops out at 5-years but those last 2-years are cheap.
I'm fairly sure he was being sarcastic. At least I hope so lol.
It's already April 1 in the UK, but not here. That's why I didn't spot it (that, and having just got in from a 15-hour day in the field). CineScrews sounds like the name of a porn channel.
Ang Lee might come out with another weird arthouse melodrama in HFR, but I can't see it going mainstream. Do check out if any feature you require has to be unlocked with a license that costs extra, though.
ahahah - I was definitely being sarcastic, but did not pay attention to the date to be honest. But considering the expiring certs and the required service contract saga, my comment was actually more real than you'd think!
Mark, the IMS series 2000 and 3000 have had 2TB SSDs as well as the Barco ICMP (X) though the 1TB spinning rust drives have been reliable. I don't know where you get your information but SSDs have been in cinemas for years and most of our new systems are using them. Again, on the SR-1000...we've used the Enterprise storage with 2TB drives (4TB total storage) and have had zero issues. Only the PSD sites have had storage issues. Even in these times, HDD/SDD are relatively cheap, user changeable and reliable. We do have a couple of sites that have the IMS3000's NAS storage for about 10.5TB total (shows play off the NAS). Those sites tend to have festivals or a large quantity of 1-off shows (screening rooms), however. Our most popular configuration remains the 4TB of total storage via 3 x 2TB drives.
I have not had issues with Dolby's tech support (or Barco/Cineonic or GDC).
Note, on the GDC SR-1000...you can get up to 10-years of warranty (3 with the server 7-years extended) if you want to protect your purchase out that long. It won't cover the consumables (drives) but it should cover most everything else. Barco ties their server warranty to the projector it is in so, in effect, you could warrant your ICMP out to 10-years too. Dolby tops out at 5-years but those last 2-years are cheap.
Steve, GDC does still not advocate using SSD's. Not sure why, because they work just fine. I install them when ever drives fail in a PDP-3000. I have not had a drive failure in a full size server for going on 8 years. I suspect that most of the existing drives will outlast the old servers. No complaints from me on GDC or Barco tech support. Dolby's used to be dismal, however it got better when they hired Mike Renlund.. Fortunately, there is but one Dolby server left amongst the customers I still do work for, but no sound processors. I like the Cinecache, and having a TMS. Cinecache is a lot better than old fashioned hard drives and the server can be repaired if Cinecache ever fails. GDC actually sends you another refurbished server anyway... I installed three SR-1000 in central Utah right after they came out. My experience with the 1000 was totally opposite the 3000. The 1000's actually had to have the latest updates in order to even work. But after that they were fine. The theater has had zero problems with them... They are also hooked to the existing TMS and all remote controlled from another theater location.
I had a semi-early SR-1000 and yes, it needed the then "pilot" version of the software to get it to work properly but the last one I put in a few months ago, didn't. The IMS3000 has been on 3.4.11 for some time now so, yeah, new ones will work out of the box. I like having the drive at the server and Dolby puts a backup on those drives. If you ever need to do a server swap, moving the drives over moves the backup with it and bam you have your shows, schedules, everything right there (just not the keys). I don't think I've had an SR-1000 go down.
Tweet
Comment