Welcome to the new Film-Tech Forums!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
I am currently building a new auditorium control panel and would like to integrate the JSDV-100 into it.
Does anyone know if DWG Files or similiar are available?
The manual for the JSDC-100 is at http://ftp.uslinc.com/Products/JSDV-...structions.pdf . It does not give dimensions since the JSDV-100 was supplied with a standard electrical box. Measuring the unit I have here, the panel is 2.8 inches wide and 4.585 inches high. The mounting holes are spaced about 3.4 inches.
.
Tweet
)
Comment