Welcome to the new Film-Tech Forums!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Hi evrebody, please need help, in my servers DCP 2000 Doremi got lost time very very highly, just about more 360 seconds. How could i update time in NTP servers by using sinhronithation, or maybe i could
my servers NTP??? Maybe exist special servers for this???
You do not have permission to view this gallery.
This gallery has 1 photos.
I would recommend that you contact Dolby support because from what I see your equipment is not up to date in software and firmware. Maybe that will correct the time lag.
That may be the version for S1 projectors? It's been updated for the certs so that's my guess. If it is an S2 projector then the software should be updated.
And for NTP sync (which may be working, this looks like a TMS address scheme and the TMS is usually an NTP server) you need to have a reachable NTP server set up.
But really there's no worry as it isn't quite at 360 seconds and you get a new 360 seconds adjustability on New Years Day, four days from now.
Comment