I generally like the idea of hiding surround speakers, because it somehow increases the amount of "movie magic". It's like covering your screen with a curtain. You know it's there, but you don't see it until it's absolutely necessary. But yes, it requires a lot of considerations and design adaptations, which equal money. That's why it's just seldomly done. Even the guys that are known for immersive theming, like Disney, sometimes have a hard time hiding speakers out of sight. It's not always trivial to let them sound good and make them invisible the same time.
We've integrated our side speakers in our screening room into columns that protrude from the wall, but those columns are essentially empty inside for the parts where there are no speakers. They're also covered with heavy MDF on both the top and the bottom at the part where the speakers themselves are. The opening is sufficiently wide as not to block any relevant output from the speakers. So the speakers don't really recess into the wall. We did so to avoid creating some kind of secondary source of resonance by essentially extending the speaker box. The fabric covering them is extremely light, so light that you need to keep the stuff behind it dark and non-reflective, otherwise it would reflect through the fabric.
This is also why we didn't want to try this same experiment on the ceiling, the chance of altering the acoustics of the speaker are very well present. Next time we're going to renovate, I'll accept it as a challenge to design speakers that "hide away" in the ceiling.
I'm wondering what kind of stuff Dolby is using for their original Dolby Cinema build-outs. I've brought a flashlight one-time and shone at the ceiling, but there was nothing there that apparently reflected back.
We've integrated our side speakers in our screening room into columns that protrude from the wall, but those columns are essentially empty inside for the parts where there are no speakers. They're also covered with heavy MDF on both the top and the bottom at the part where the speakers themselves are. The opening is sufficiently wide as not to block any relevant output from the speakers. So the speakers don't really recess into the wall. We did so to avoid creating some kind of secondary source of resonance by essentially extending the speaker box. The fabric covering them is extremely light, so light that you need to keep the stuff behind it dark and non-reflective, otherwise it would reflect through the fabric.
This is also why we didn't want to try this same experiment on the ceiling, the chance of altering the acoustics of the speaker are very well present. Next time we're going to renovate, I'll accept it as a challenge to design speakers that "hide away" in the ceiling.
I'm wondering what kind of stuff Dolby is using for their original Dolby Cinema build-outs. I've brought a flashlight one-time and shone at the ceiling, but there was nothing there that apparently reflected back.
Comment