Strong X-60-C lamphouse problem

[Tim Androes]

Is the auto strike board on the igniter assembly in the X-60 the same as the board in the Super LumeX?

[Steve Guttag]

No! the X60C, in particular used, a 220V igniter. The Super Lume-X was always a 120V igniter system. I don't recall if the X60D used the same igniter. The Super Lume-X only had to handle up to 2500-watts. X60 was for 3KW on up.

[John Eickhof]

in a word...YES the x60 b-d uses the same trigger board but it is not directly interchangable with the lume-x or super lume-x, however, a board out of the super lume x or ultra 80 lamphouse can be easily retrofitted. x60 pcb #81861, (obsolete) super lume x, ultra80 pcb#40913 (late mfg) both pcbs are 120v ac as there is a step down circuit in strong power supplies so yes the super lume x board will work. i should have nos boards if you need one, easy to wire in.