Film Handler's Forum

Welcome to the new Film-Tech Forums!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
The Xetron Loop-Matic in operation by Brad Miller Started by Brad Miller, 08-20-2022, 04:00 PM	29 responses 1,336 views 5 likes	Last Post by Frank Angel 10-04-2022, 09:37 AM
35mm Lamps by Brad Sime Started by Brad Sime, 09-29-2022, 09:07 AM	6 responses 459 views 0 likes	Last Post by Steve Guttag 10-03-2022, 06:58 PM
Identifying sound film edge code by Min young Park Started by Min young Park, 09-23-2022, 10:41 PM	8 responses 515 views 0 likes	Last Post by Jim Cassedy 09-27-2022, 09:27 AM
MONO SVA Sound Tracks and Noise Reduction by Paul Finn Started by Paul Finn, 09-05-2022, 11:49 AM	19 responses 1,099 views 0 likes	Last Post by Paul H. Rayton 09-16-2022, 12:43 AM
Dts romdos by Marco Giustini Started by Marco Giustini, 08-14-2022, 07:30 AM	6 responses 319 views 0 likes	Last Post by Marco Giustini 09-02-2022, 01:19 PM
Stuck Kelmar Rewind Shaft by Jim Cassedy Started by Jim Cassedy, 07-13-2022, 06:20 PM	10 responses 443 views 0 likes	Last Post by Jesse Crooks 08-29-2022, 12:50 PM
3D Printing Cores- Is It Possible? by Jim Cassedy Started by Jim Cassedy, 08-23-2022, 01:12 PM	13 responses 585 views 0 likes	Last Post by Brad Miller 08-26-2022, 09:18 PM
CP65 remote fader / remote muting question by Emiel de Jong Started by Emiel de Jong, 08-24-2022, 09:16 AM	3 responses 219 views 0 likes	Last Post by Emiel de Jong 08-25-2022, 11:02 AM
Dts tcr 1.46 by Marco Giustini Started by Marco Giustini, 06-13-2022, 02:02 AM	6 responses 308 views 1 like	Last Post by David Ferguson 08-23-2022, 09:49 AM
Pulley on lower feed sprocket shaft. by Yves Leibowitz Started by Yves Leibowitz, 08-22-2022, 02:38 PM	2 responses 141 views 0 likes	Last Post by John Eickhof 08-22-2022, 03:55 PM

Previous 1 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 47 template Next

No topics found.

Mark This Channel Read

Announcement