Film Handler's Forum

Welcome to the new Film-Tech Forums!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
Replace Eiki belts by Zsolt Boros Started by Zsolt Boros, 10-31-2024, 03:35 PM	8 responses 144 views 0 likes	Last Post by Zsolt Boros 11-01-2024, 08:17 AM
Platter history info wanted by David Ferguson Started by David Ferguson, 10-29-2024, 09:29 AM	13 responses 366 views 0 likes	Last Post by Sean McKinnon 10-31-2024, 11:21 AM
Scammer alert by Brad Miller Started by Brad Miller, 07-16-2024, 11:14 AM	2 responses 315 views 3 likes	Last Post by Ryan Gallagher 10-29-2024, 09:24 AM
'Double Shutter' Century's by Jacob Tutt Started by Jacob Tutt, 06-14-2022, 08:39 AM	25 responses 1,335 views 0 likes	Last Post by Helmut Maripuu 10-28-2024, 03:24 PM
Emulsion build-up on Simplex tension bands by Jesse Crooks Started by Jesse Crooks, 10-17-2024, 10:42 PM	27 responses 510 views 0 likes	Last Post by Randy Stankey 10-25-2024, 12:21 PM
24" Film-Tech Reel Fitment Problem by Ryan Gallagher Started by Ryan Gallagher, 10-19-2024, 09:30 AM	2 responses 236 views 0 likes	Last Post by Jesse Crooks 10-22-2024, 09:03 PM
Recoating a reflector by Phil Ranucci Started by Phil Ranucci, 10-19-2024, 12:45 PM	5 responses 209 views 1 like	Last Post by Phil Ranucci 10-21-2024, 01:29 PM
Adjusting Kelmar Take-Up Clutches by Jim Cassedy Started by Jim Cassedy, 10-11-2024, 06:11 AM	15 responses 282 views 0 likes	Last Post by Steve Guttag 10-18-2024, 06:26 PM
Altec Lansing Voice of the Theater cabinets and speakers Identification by Bill Seipel Started by Bill Seipel, 10-11-2024, 09:41 AM	18 responses 526 views 1 like	Last Post by Mark Gulbrandsen 10-18-2024, 09:40 AM
IREM EX-170 switching rectifier v/s traditional IREM N3 etc. by Jerry G. Axelsson Started by Jerry G. Axelsson, 10-11-2024, 01:40 AM	2 responses 151 views 0 likes	Last Post by Jerry G. Axelsson 10-14-2024, 01:30 AM

Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 45 template Next

No topics found.

Mark This Channel Read

Announcement