Chistie CP2210 - Complete Power Failure

[Ryan Gallagher]

We have 2 screens, one of which is going down for remodel and upgrades “soon”. I think in light of all this I’m gonna advise we keep the No.2 projector for parts in a location it can be powered peridocally? Seems prudent considering the upgrade horizon for the other is at least 4 years away?

[Frank Cox]

Here are Christie's recommendations during the Covid shutdown:

For Christie Series-1 projectors CP2000 i/-H/-S/-SB/-X/-XB:
-
Power up every 7 days for ‘ON’ duration of 3 hours
For Christie Series-1 projectors: CP2000-ZX, CP2000-M:
-
Power up every 3 days for ‘ON’ duration of 3 hours
For all Christie Series-2 projectors without IMB-S2 (CP2215, CP2220, CP2230, CP4220, CP4230,
CP42LH):
-
-
-
Power up every 7 days for ‘ON’ duration of 3 hours
Ensures LD (Link Decrypter) and 3 rd party IMB* stays fully charged
See tech bulletin(s) for ICP, PIB, and TPC battery replacement procedures
o *If using 3 rd party IMB, use recommended manufacturer guidelines if available
For all Christie Series-2 projectors with IMB-S2 (SolariaOne, SolariaOne+, any projector with IMB-S2):
- Power up every 3 days for ‘ON’ duration of 3 hours
- See tech bulletin for IMB-S2 Security FIPS Tamper Management
- See tech bulletin(s) for ICP, PIB, and TPC battery replacement procedures
- When powering down a projector, the security ring and service door MUST both be closed.
Leaving these open will drain the IMB battery
For all Christie Series-3 projectors with or without the IMB-S3 (CineLife Series: CP2308, CP2315-RGB,
CP2320-RGB, CP4315-RGB, CP4320-RGB, CP4330-RGB):
- Power up every 7 days for ‘ON’ duration of 3 hours
o If using 3 rd party IMB, follow manufacturer guidelines if available
For all Christie Series-4 projectors (CineLife+ Series: CP4440-RGB, CP4450-RGB):
- -Power up every 7 days for ‘ON’ duration of 3 hours, based on IMB installed
o If using 3 rd party IMB, follow manufacturer guidelines if available