Assistance Needed – Resetting RealD 3D single eye to dual eye Configuration

[Shibu Paul]

Hi all,

We have a dual projection setup with Dual RealD 3D, where one projector is configured for the left eye and the other for the right eye. We are planning to upgrade to a sigle higher model projector in this auditorium. However, we couldn’t find an option to reset the RealD 3D configuration to enable both eyes in a single projector unit.

Any ideas on how to reset this configuration?

[Dave Macaulay]

Dual projector presumably has a polarizer unit on each projector, each with only one "direction" of polarization.
For single projector you need a polarizer that switches polarization direction, like the Real-D XL.
I haven't personally seen a dual Real-D system and maybe they do use two XLs with set on opposite polarizations? If so and they are standard XLs you just need a 3D signal cable. But an XL is a rather expensive piece of equipment so I really doubt that's the case.
Post an image of whatever 3D adapter is on the dual projector setup.