Digital Cinema Forum

Welcome to the new Film-Tech Forums!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 1999-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
Looping clip during feature on GDC SX2001 non-imb by Justin Hamaker Started by Justin Hamaker, 07-04-2021, 03:40 PM	7 responses 205 views 0 likes	Last Post by Carsten Kurz 07-05-2021, 05:33 PM
SNMP Trap problems on Wind Blows 10. by Mark Gulbrandsen Started by Mark Gulbrandsen, 06-17-2021, 02:43 PM	47 responses 1,298 views 0 likes	Last Post by Marcel Birgelen 07-05-2021, 02:50 AM
GDC PSD-3000 Hard Drive recommendations? by Ron Higgins Started by Ron Higgins, 06-25-2021, 11:29 AM	13 responses 746 views 0 likes	Last Post by Greg Routenburg 06-30-2021, 10:56 AM
Barco Light Engine by Marcial Feliciano Ramos Started by Marcial Feliciano Ramos, 06-19-2021, 09:42 AM	11 responses 566 views 0 likes	Last Post by Marcial Feliciano Ramos 06-29-2021, 12:28 PM
LMS Warranty by Lucas Iaccarino Started by Lucas Iaccarino, 06-24-2021, 02:22 AM	7 responses 173 views 0 likes	Last Post by Dennis Benjamin 06-25-2021, 09:33 AM
Looking for advice on replacing LMS/TMS by Chris Daigle Started by Chris Daigle, 08-26-2020, 04:31 PM	18 responses 1,728 views 0 likes	Last Post by Dennis Benjamin 06-25-2021, 09:30 AM
Enigma Comm Error after installing a new Enigma board NEC NC2000C by Justin Hamaker Started by Justin Hamaker, 06-21-2021, 07:27 PM	14 responses 1,050 views 0 likes	Last Post by Carsten Kurz 06-23-2021, 06:39 AM
How to ride out short power outages. by Adam Fraser Started by Adam Fraser, 06-21-2021, 07:53 AM	11 responses 298 views 0 likes	Last Post by Steve Guttag 06-22-2021, 05:40 AM
NEC NC2000C Bad Certificate Error by Justin Hamaker Started by Justin Hamaker, 01-21-2021, 08:42 PM	44 responses 1,963 views 0 likes	Last Post by Justin Hamaker 06-22-2021, 04:33 AM
Screen “delamination” ? by Geoffrey Hudson Started by Geoffrey Hudson, 06-20-2021, 07:29 AM	2 responses 321 views 0 likes	Last Post by Marcel Birgelen 06-20-2021, 10:36 PM

Previous 1 35 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 108 template Next

No topics found.

Mark This Channel Read

Announcement